Toshiba HR40X - 4 Channel Quadrophonic Headphones, 1973, made in Japan

 
Link: radiomuseum

You can switch it from 2 channel to 4 channel.

Covered in a mottled brown, leather type material.
Each ear plate houses have 2 speakers, which provide the balance sound, externally they are labelled left/right and front/rear.
Left plate houses the 2/4 channel switch. the cable has front/rear label too. Two plugs are all 6.3 mm phone connectors. The headphone has a adjustable headband and stop with two screws.

Country:  Japan
Manufacturer / Brand:  Toshiba Corporation; Tokyo
alternative name  
Shibaura Engineering Works
Brand Tokyo Shibaura
Year: 1973 ? Category: Loudspeaker, headphone or earphone
Wave bands - without
Details
Loudspeaker - Is a Headphone or Earphone
Power out
Model: HR40 - Toshiba Corporation; Tokyo
Material Various materials
Notes
  • Quadrophonic headphones.
  • 4 channel / 2 channel switcher.
  • Each 2 dynamic LS systems, 20-20000Hz, 4 x 1mW
  • Impedance 8 oHm


 

 

Telefunken RC-300 3 motor direct Multidrive Stereo Cassette Deck, 1980, made in Germany

The RC 300 is arguably one of the best, luxurious...and most expensive tape decks Telefunken has ever built. No tape deck before or after had a longplay option, or a three-motor mechanics. The drive mechanism is the MultiDrive mechanism that was developed by Papst, a company that is today still known for the quality of their fans. With a separate motor for the capstan and each reel, there is no need for belts or rubber rolls, all controls are done electronically and there are much fewer parts that can fail.
The RC 300 was part of Telefunken's T 300 high-end component system, and it has a remote control input that allows the drive functions to be controlled via the RP 300 pre-amplifier.

Link: radiomuseum | hifiengine | john.ccac.rwth-aachen



Country:  Germany
Manufacturer / Brand:  Telefunken Deutschland (TFK), (Gesellschaft für drahtlose Telegraphie Telefunken mbH
Year: 1980 ??

Category: Sound/Video Recorder and/or Player
Valves / Tubes 1
Semiconductors (the count is only for transistors) 28 x IC, 76 x transistors, 84 x diodes, 27 x LED
Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.75 cm/s
Heads: 1 x record/playback, 1 x erase
Tape Type: type I, FeCr, Cr02, Metal
Noise Reduction: High Com
Frequency Response: 30Hz to 20kHz (Metal tape)
Signal to Noise Ratio: 72dB (High Com)
Wow and Flutter: 0.2%
Total Harmonic Distortion: 2%
Input: 180mV (line), 0.5mV (mic)
Output: 1.1V (line)
Reception principle Audio-Amplification
Wave bands - without
Details Cassette-Recorder or -Player; Radio Control (+Remote Wire etc)
Power type and voltage Alternating Current supply (AC) / 220/110 Volt
Loudspeaker - For headphones or amp.
Power out
Model: RC 300 - Telefunken Deutschland TFK,
Material Metal case
Shape Tablemodel, with any shape - general.
Dimensions (WHD) 435 x 111 x 375 mm / 17.1 x 4.4 x 14.8 inch
Notes
3 motor direct Multidrive Cassette Deck, 2 speed, Hi-COM NR, RCA and DIN connectors, digital tape counter with vacuum fluorescent display. 28 ICs, 84 diodes, 27 LEDs.
Net weight (2.2 lb = 1 kg) 8.1 kg / 17 lb 13.5 oz (17.841 lb)
Collectors' prices 

Downloads
instruction/owners manual
schematics
service manual


Braun KH1000 Headphones (designes by Reinhold Weiss), 1967, made in Germany



Country:  Germany
Manufacturer / Brand:  Braun; Frankfurt
Year: 1967–1975 Category: Loudspeaker, headphone or earphone
Wave bands - without
Details
Power type and voltage No Power needed
Loudspeaker - Is a Headphone or Earphone
Power out
Model: KH1000 - Braun; Frankfurt
Material Various materials
Notes
Dynamischer Kopfhörer mit abgedichteten Ohrmuscheln, leichtem Bügel und langem Anschlusskabel mit Normstecker.
Übertragungsbereich 16-20000 Hz, Schalldruck 110dB/1mW, Klirrfaktor 0,3% bei 1000Hz/120dB, Nenn-Scheinwiderstand 400 Ohm, Belastbarkeit 400 Milliwatt.
Net weight (2.2 lb = 1 kg) 0.5 kg / 1 lb 1.6 oz (1.101 lb)
Price in first year of sale 180.00 DM
Collectors' prices  
Mentioned in -- Original prospect or advert
Literature/Schematics (1) - - Manufacturers Literature

Literature/Schematics (2) Handbuch VDRG 1967/1968

Braun CES 1020 Pre-amp Reciever, 1972-75, made in Germany




Link: radiomuseum | hifimuseum | elektrotanya


Country:  Germany
Manufacturer / Brand:  Braun; Frankfurt
Year: 1973–1975 Category: Broadcast Receiver - or past WW2 Tuner
Semiconductors (the count is only for transistors) 60:
Reception principle Super-Heterodyne (Super in general); ZF/IF 455/10700 kHz
Tuned circuits 10 AM circuit(s)     14 FM circuit(s)
Wave bands Broadcast, Long Wave, Short Wave plus FM or UHF.
Details
Power type and voltage Alternating Current supply (AC) / 110; 220 Volt
Loudspeaker - For headphones or amp.
Power out
Model: CES1020 - Braun; Frankfurt
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 500 x 110 x 320 mm / 19.7 x 4.3 x 12.6 inch
  • Notes 6 ICs. Hi-Fi-Stereo-Tuner mit Regelvorverstärker; Abstimm- und Feldstärkeanzeige durch Instrumente.
  • Der CES 1020 ist ein sog. Stereo-HiFi-Preceiver (=Tuner-Vorverstärker)  und wurde konzipiert zum Betrieb an aktiven Lautsprechern wie z.B. Braun LV 1020 oder LV 720.
  • Er ist – bis auf die fehlende Endstufe – identisch mit dem Braun Receiver regie 510.
  • Der CES 1020 hat einen UKW-Baustein mit 4-fach-Drehkondensator, alle Stufen befinden sich in getrennten Kammern. Die Eingangsstufe hat eine FET-Kaskodeschaltung und Dual-Gate-FET-Mischer mit getrenntem Oszillator.
  • Der FM-ZF-Baustein verfügt über  6 Bandfilter-gekoppelte IC.Der NF-Verstärker hat 3 Eingänge Phono/ Reserve/ Band bzw. Hinterband-Kontrolle. Die NF-Ausgangsstufe ist geschützt durch Strombegrenzung/ Kurzschluss-Automatik/ Temperatur-Abschaltung.

Technische Daten:
  • FM-Empfindlichkeit:        0,8 μV
  • AM-Bereiche:                 145 – 345 kHz / 512 – 1640 kHz / 5,8 – 8,2 MHz
  • AM-Empfindlichkeit:       < 10 μV
  • Ausgangspegel:              0,5 V
  • Übertragungs-Ber.:         25 – 35.000 Hz
  • Gehäuse:                         Stahlblech mit anthrazit-grauem Kräusellack, Frontblende schwarz oder wahlweise aluminiumfarben

Net weight (2.2 lb = 1 kg) 10 kg / 22 lb 0.4 oz (22.026 lb)
Price in first year of sale 1,450.00 DM
Collectors' prices  
External source of data Erb

Source of data Katalog RFP 1973


Wega LB3503 [from Wega 3102 Tube Stereo Receiver], 1965, made in Germany


Link: radiomuseum | wega.pytalhost


Акустика от Wega 3102 Tube Stereo Receiver (Nuss/Teak), 1965-1967, made in Germany

Country:  Germany
alternative name Württemb. Radio-Ges.mbH; Stuttgart
Year: 1965 ? Category: Loudspeaker, headphone or earphone
Wave bands - without
Details
Power type and voltage No Power needed
Loudspeaker 2 Loudspeakers
Power out
Model: 3503 [Nussbaum/Teak] - Wega, Württembergische Radio-
Material Wooden case
Dimensions (WHD) 500 x 215 x 350 inch / 12700 x 5461 x 8890 mm
Notes
  • Wega LB3503 Speaker box for connection to stereo control unit WEGA 3102
  • 1 perm.-dyn. Tiefton system, 17.5 cm
  • 1 perm.-dyn. Mid-high-frequency sy-stern. 115 cm
  • Impedance 8 Ohm
  • Wooden housing with lateral metal walls
  • Walnut, natural, or teak or rosewood
Net weight (2.2 lb = 1 kg) 9 kg / 19 lb 13.2 oz (19.824 lb)
Price in first year of sale
  • Walnut or teak 198, -
  • Rosewood 238,-
Mentioned in Handbuch VDRG 1965




Hilton Sound (Hans G.Hernel GmbH + Co KG) SOFTLINE SL 400, 1975?, made in Germany


Chronicle: January 1, 1948Family Hennel founded "Heco" in Schmitten / Taunus. (Other sources say 1949) First, only tube radios are produced.1965The first Heco HIFI loudspeakers, the B310 are produced. They were developed by the still young engineer Wolfgang Seikritt. SourceTo the 1970sHans G. Hennel dies. It should have come to disputes. A bust of the firm threatens. Quelle1972Heco is sold together with factories in Remscheid and Schmitten and including name rights to the British Rank-Radio.
But a small part of the family business remains in the family, including part of Hans G. Hennel's daughter (or woman?) Suse Hennel.192 Three employees leave Heco and found CANTON. Founding members were Hubert Milbers (Managing Director), Otfried Sandig (Marketing, Sales), Günther Seitz (Technology) and Wolfgang Seikritt (Development) Source 1975Heco Hennel & Co Berlin, owned by Suse Hennel. The company belongs to the holding company H. Dahl KG, Hamburg. Also included are Visonik KG, Dahl Elektronik KG and CEC Europa GmbH. Visonik was known for its compact David speakers. SourceCa. 1975Each loudspeaker developer from Braun changed to internal disputes to Heco and Canton. SourceAb approx. 1975Loudspeakers under the company name Summit with reference to "A product of Hans G. Hennel GmbH + Co KG" are produced. The production site is Usingen. (However, there are also summaries from Summit / Wehrheim). Since they do not bear the designation "Heco", it remains to be assumed that also this company still belongs to the family enterprise and not to Rank. In the point, of course, I can deceive myself! Comparisons in the 70s: There are also loudspeakers under the brand "Hilton Sound", originally marketed by "Elektroakustische Geräte H.Hilgers GmbH & Co. KG", marketed (Whether only marketed, or also manufactured I do not know yet). They also bear the words "A product of Hans G. Hennel GmbH + Co KG" (without location details). The loudspeakers with the brand names "Planet" and "MR Service" and loudspeakers without further brand names (eg: TS 7007, GTS 1020) bear the same designation. 1980 - 1986: still missing1986Heco is acquired by a German entrepreneur team. It goes up again. Quelle1986 - 1996: still missingEnde 1996Heco GmbH (Taunus) and Heco Electronics GmbH report insolvency and are taken over by the American Recoton Corporation in December by RECOTON Holding GmbH. Heco now operates as Heco Audio (Produkte) GmbH in Pulheim. QuelleSommer 2003Support of RECOTON Holding GmbH by AUDIOVOX old-fidelity


Graetz Profi HiFi-Boxen P1-80 [ITT Hyperion H2-70], 1975, made in Germany


In 1975, the Graetz brand presented its top-of-the-range devices, called "PROFI". This professional series includes control units "Profi 306", "Profidirektor 306" and "ProfiStudio 306" as well as the "ProfiCorder 306" - a HiFi stereo cassette recorder with DOLBY noise reduction system. "Profi HiFi-Boxes" - the types P1-80, H2-90, H2-80F, H2-100, H2-120 are matched and technically adapted for this series. All these devices far exceed the HiFi standard DIN 45500 according to the manufacturer.


Link: graetz-radio | graetz.pytalhost


System: 3 ways
Internal socket for the old din connector
Rated load: 50 watts
Power Consumption: 80 Watts
Transmission range: 33 - 25,000 Hz
Woofer: 175 mm
Mid-range: 250 mm
Tweeter: 190 mm
Net weight (2.2 lb = 1 kg) 7 kg/pcs
Dimensions (WHD): 430 x 225 x 215 mm
Colour: Brown, black

Completely trimmed in synthetic leather!

Graetz Profi HiFi-Boxen P1-80 клоны ITT Hyperion H2-70




Muvid IR 915 DVD Compact System



Amplifier and DVD player 2 x 10 W RMS + 25W RMS ???
iPod docking station with charging function and playback
Support MPEG-4 player: Xvid / DVD / SVCD / VCD / MP3 / JPEG / Kodak Picture CD
HDMI 1080p and HD-JPEG
USB port and card reader 3-1
Large, blue backlit LCD display
CD-MP3 Converter to create MP3 files from an audio CD
Format: MP3 / WMA / AAC / FLAC
Green CE: Stand By <1 Watt switch front
Dimensions: Unit: 430 x 160 x 235 mm (W. X h. X D).
Weight: 9.8 kg

Connections:
  • 1 Docking Station for iPhone / iPod 
  • 1 USB 2.0
  • 3-1 1 card reader
  • 1 HDMI output
  • 2 Line Out
  • 1 LAN port (RJ45)
  • Wireless ??? (Muvid IR 915 Stereo Internet Tuner)
  • 1 optical output
  • 1 coaxial output

Dx2500 Electronics Drum, 1995, made in Ukraine ???


This UNIT in Museum of The Soviet Synths & Matrixsynth

the only unit found (have been in search since 1995)


Linn KAN MK1, 198?, made in Scotland


All Linn serial numbers are Scottish serial numbers, there are no US Linn serial numbers. Linn Products are made in Scotland.

These Kans can take both banana plugs and binding posts.

The Mark 2 was biwireable.

The biggest difference between the Mk1 and Mk2 is the fact the Mk1 has internal damping, which is why many people think the Mk1 is better. Of course Mk2 can be modified with internal damping, plus you get all the advantages of all the other internal upgrades Linn made to the Kan 2.




MDF cab
The Linn Kan, which shares two of the drive units of the Isobarik - hf unit KEF B110 SP1057 MATCHED LS3/5a

Tweeters hiquphon

Plastic hangers on woofers, tweeters without ferrofluid.